LRGB3393-C1 ligitek electronics co.,ltd. property of ligitek only data sheet LRGB3393-C1 a doc. no : qw0905- rev. : date : 10 - aug. - 2011 triple color led lamps lead-free parts pb l dcc
0.4 13.6 part no. page 1/7 25.0min 4-1.27typ 1.0min 1.0min
ingan/gan typical electrical & optical characteristics (ta=25 ) gaalas ingan/gan note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. material LRGB3393-C1 part no blue ---- 470 water clear lens red green emitted ---- 518525 3.54.0 450 ---- 30 3.54.0 20 900 900 550 min. ---- 1.52.4 20 ---- 36 typ. min. max. 12 1100 20 1500 typ. spectral halfwidth nm color dominant wave length d nm peak wave length pnm luminous intensity @20ma(mcd) forward voltage @20ma(v) viewing angle 2 1/2 (deg) LRGB3393-C1 electrostatic discharge( * ) parameter absolute maximum ratings at ta=25 power dissipation peak forward current duty 1/10@10khz operating temperature reverse current @5v forward current storage temperature part no. 30 ma 30 i f 40 -30 ~ +100 -20 ~ +80 t opr tstg esd ir10 ---- i fp pd 120 120 50 150 a v 100100 120120 ma mw 2/7 page symbol urf dgmdbk ratings unit ligitek electronics co.,ltd. property of ligitek only 630
1.0 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 ? ??
3.0 2.5 1.5 1.0 0.5 0.0 2.0 fig.4 relative intensity vs. temperature r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) 450 0.0 0.5 500550600 ambient temperature( ? ?
3.0 2.0 1.0 1.5 2.5 fig.4 relative intensity vs. temperature 0.0 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a 1.0 wavelength (nm) 400 0.0 0.5 450 fig.3 forward voltage vs. temperature 0 ambient temperature( ?
note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. dip soldering preheat: 120
description the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. ligitek electronics co.,ltd. property of ligitek only the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. the purpose of this test is the resistance of the device under tropical for hours. this test intended to see soldering well performed or not. 1.t.sol=230
|
